Gluing a puzzle is a great way to preserve your hard work and turn it into a piece of art that you can display. But the process of gluing can be a bit tricky, especially if you've never done it before. In this blog post, we will guide you through the process of how to glue a puzzle step-by-step.
Preparing the puzzle
Before you start gluing, you need to make sure that the puzzle is complete and flat. Carefully slide a piece of wax paper under the puzzle to protect the surface underneath. Then, flip the puzzle over and apply glue to the back of the puzzle. Spread the glue evenly with a paintbrush or a sponge.
Drying time
Allow the glue to dry completely. The drying time will depend on the type of glue you're using and the size of the puzzle. Generally, it takes around 24 hours for the glue to dry completely.
Mounting the puzzle
Once the glue has dried, carefully remove the wax paper from underneath the puzzle. Now you can mount the puzzle onto a backing board. Apply a thin layer of glue to the backing board and carefully place the puzzle onto it. Use a rolling pin or a brayer to press the puzzle onto the backing board and remove any air bubbles.
Finishing touches
Allow the puzzle to dry completely before adding any finishing touches. Once the puzzle is dry, you can trim any excess backing board from the edges of the puzzle. You can also add a coat of varnish to protect the puzzle from dust and moisture.
Framing the puzzle
If you want to frame your puzzle, make sure that it is completely dry and flat before you do so. Use a frame with a deep rabbet to accommodate the thickness of the puzzle. Mount the puzzle onto a backing board and place it inside the frame. Secure the backing board with framing points or tape.
In conclusion, gluing a puzzle is a simple process that can be done by anyone. By following these steps, you can turn your puzzle into a piece of art that you can display for years to come.